How To Change An Air Filter In A Subaru Forester

Subaru Forester Engine Air Filter Replacement Guide
How to check or change the FB25 two.5L engine air filter element in a 4th generation 2014 to 2018 Subaru Forester.

2017 Forester FB25 Engine
Engine Air Filter Box
Two Metal Latches This automotive maintenance tutorial was specifically written to assist owners of the fourth generation (2014, 2015, 2016, 2017 & 2018) Subaru Forester SUV in cleaning or changing the engine air filter chemical element for the FB25 2.v liter four cylinder motor.

Owners of other Subaru vehicles such as the Outback, Impreza, Legacy, XV Crosstrek, WRX, BRZ, SVX, Tribeca, Exiga, Trezia, Levorg and Baja may besides find these DIY instructions to be helpful.

A few uniform replacement engine air filters with their function numbers include the following: Fram CA9997, EPAuto GP997, K&N 33-2304, ACDelco A3109C, Wix 49012, Purolator A35592, Mahle LX 2672 and Bosch 5358WS.

No tools are needed to access and supplant the engine air filter.

Release Metal Latches
Pull Off Second Fastener
2 Latches Released The kickoff two steps are to open up the hood so motion to the left (passenger) side of the engine bay.

The black plastic engine air filter box and air intake assembly are located merely behind the passenger side headlight assembly.

There are two silver metal latches that secure the two halves of the air box together.

Pull upwardly on the front border of the latches to release them.

Swing up the hinged latches and move them towards the rear of the engine bay.

Push Back Rear of Air Box
Lift Out Former Air Filter
Old Air Filter Removed An optional step is to loosen the metallic hose clamp on the air intake by turning it counterclockwise with a flathead screwdriver or a socket and a ratchet.

Loosening the hose clench volition make it easier to divide the two halves of the air filter box.

Push back the rear half of the air box to access the old filter.

Pull the one-time air filter upwardly and out of the air box.

Inspect Both Sides
Clean With Vacuum
Lower In New Air Filter Inspect both sides of the old air filter.

If the onetime filter is dark grey or black and chock-full with dirt, dust, hair, soot, pollen, insects, leaves, twigs, sand and other debris, it should be replaced with a new element.

I recommend buying the Fram CA9997 engine air filter since it has excellent reviews on Amazon.

If you prefer to purchase the genuine OEM filter, the part number is Subaru 16546AA120.

If the old filter is relatively make clean, just tap out the large debris and remove any fine dust with a vacuum cleaner.

Lower the new filter into the air box with the protruding pleats facing towards the front of the motorcar and the foursquare black plastic frame facing towards the rear of the vehicle.

Line Upwards Tabs & Slots
Lower Tabs Into Slots
Close Air Box Line up the plastic tabs on the lesser edge of the rear half of the air box with the slots on the front half.

Re-insert the tabs into the slots and close the air box.

Snap On Metal Latches
Air Intake Hose Clench
Engine Air Filter Replaced Swing the metallic latches upward and towards the front of the SUV.

Pop the metallic latches back into identify over the front part of the air box to secure the two halves together.

If you loosened the metallic hose clench, be certain to tighten it by turning the fastener clockwise with a flathead screwdriver.

For more than, please check out all of my 2014-2018 Subaru Forester DIY Repair & Maintenance Guides.

How To Change An Air Filter In A Subaru Forester,

Source: https://www.paulstravelpictures.com/Subaru-Forester-Engine-Air-Filter-Replacement-Guide/

Posted by: taylorafor1953.blogspot.com

Share this post